| CLARKSON |
 เป็นหนึ่งในโรงงานผ้ผลิตเครื่องมือตัด
(Cutting Tools)
ที่ใหญ่ที่สุดในยุโรป
ด้วยเล็งเห็นถึงความต้องการของลูกค้าในอังกฤษ
และความเป็นจริงในปัจจุบัน
Clarkson
เป็นที่รู้จักของลูกค้าจากทั่วทุกมุมโลกจึงทำให้
Clarkson
เป็นอีกก้าวหนึ่งของเทคโนโลยี
ที่ล่ำหน้ากว่า ด้วยคุณภาพ
ความคุ้มค่าที่มีให้จากคำกล่าวข้างต้น
จึงยืนยันด้วยความแพร่หลายอยู่ทั่วโลกขณะนี้กว่า
50 ประเทศ |
 |
ล้ำหน้าด้านเทคโนโลยี Clarkson
ได้คิดค้นและพัฒนาอีกทั้งทดสอบวัสดุเคลือบผิวเพื่อความแข็งแกร่ง
|
| END MILLS: |
Autolock or Flatted shank Designed for profile,finshing and open slot milling. |
|||||
| LENGTH | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | Square End | Clarkson Autolock |
Metric or Imperial |
T1 or Premium |
2.5-20 mm 21-50 mm 3/32-2" |
 |
| LONG | Square End | Clarkson Autolock |
Metric or Imperial |
T1 or Premium |
3-50 mm 3/32-2" |
 |
| EXTRA LONG | Square End | Clarkson Autolock |
Metric | T1 | 8-40 mm |  |
| STANDARD | Square End | ISO/DIN Autolock or Flatted |
Metric | Premium | 2.5-40 mm |  |
| LONG | Square End | ISO/DIN Autolock or Flatted |
Metric | Premium | 3-40 mm |  |
| STANDARD (High Helix) |
Square End | ISO/DIN Autolock or Flatted |
Metric | Premium | 6-30 mm |  |
| LONG (High Helix) |
Square End | ISO/DIN Combi |
Metric | Premium | 6-30 mm |  |
| EXTRA
SHORT (High Helix) Std or C-kut Flute |
Square End | ISO/DIN Combi |
Metric | Premium | 12-30 mm |  |
หมายเหตุ Material Premium or CO. 8%
|
2-FLUTE SLOT DRILLS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| LENGTH | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | Square End | Clarkson Autolock | Metric or Imperial | T1 or Premium | 1.5-50 mm 1/16-2" |
 |
| LONG | Square End | Clarkson Autolock | Metric or Imperial | T1 or Premium | 2-50 mm 1/16-2" |
 |
| STANDARD | Ball Nosed | Clarkson Autolock | Metric or Imperial | T1 or Premium | 2-32 mm 1/16-1 1/2" |
 |
| LONG | Ball Nosed | Clarkson Autolock | Metric or Imperial | T1 or Premium | 3-30 mm 1/16-1 1/2" |
 |
| SHORT | Square End | ISO/DIN Autolock or Flatted | Metric | Premium | 1.5-50 mm |  |
| STANDARD | Square End | ISO/DIN Autolock or Flatted | Metric | Premium | 2-40 mm |  |
| SHORT | Ball Nosed | ISO/DIN Autolock or Flatted | Metric | Premium | 2-20 mm |  |
| STANDARD | Square End | ISO/DIN Autolock or Flatted | Metric | Premium | 3-30 mm |  |
|
RIP-R-CUTTERS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| TYPE | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| NORMAL
PITCH Standard of Long |
Square End | Clarkson
or ISO/DIN Autolock or Flatted |
Metric or Imperial | Premium | 6-50 mm 1/4-2" 8-50 mm 3/8-2" |
 |
| FINE
PITCH Standard or Long |
Square End | ISO/DIN Autolock or Flatted |
Metric | Premium | 6-50 mm 8-32 mm |
 |
|
C-KUT CUTTERS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| TYPE | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| MULTI
FLUTE Standard of Long |
Square End | ISO/DIN Combi or Flatted |
Metric | T1 HSS |
12-50
mm 12-50 mm |
 |
|
CORNER ROUNDING CUTTERS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| LENGTH | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | Corner | Clarkson Radius Autolock |
Metric or ISO/DIN Imperial |
T1 or Premium |
1-20 mm or 3/8-1 3/8" |
 |
หมายเหตุ Material Premium or CO. 8%
|
DIESINKERS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| TYPE | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| TAPERED FLUTE |
Square
End with Corner Radius or Ball Nosed |
Clarkson
Autolock or Plain |
Metric or Imperial |
PM8 or Premium HSS |
6-10 mm 1/8-1" |
 |
| TAPERED FLUTE |
Square
End with Corner Radius |
ISO/DIN Autolock |
Metric | PM8 HSS |
4-6 mm |  |
|
WOODRUFF CUTTERS: |
Autolock or Flatted shank,Centre cutting Designed for slot and plunge milling. |
|||||
| LENGTH | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | Alternate Teeth |
Clarkson Autolock | Metric or Imperial | T1 HSS |
10.5-45.5 mm 1/2-1 1/2" |
 |
| FINE
PITCH Standard or Long |
Square End | Clarkson Autolock | Metric or Imperial | T1 HSS |
12.5-60 mm 37/64-1 61/64" |
 |
|
COUNTERBORE CUTTERS: |
Autolock or Flatted shank Designed for profile,finshing and open slot milling. |
|||||
| LENGTH | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | Metric=e8 Inch= Clarkson Standard |
Clarkson Autolock | Metric or Imperial | T1 HSS |
8-33 mm 0.344-1 11/32" |
 |
|
DOVETAIL CUTTERS: |
Autolock or Flatted shank Designed for profile,finshing and open slot milling. |
|||||
| TYPE | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| STANDARD | 45
C 55 C 60 C |
Clarkson Autolock | Metric or Imperial | T1 HSS |
13-50 mm 5/8-1 1/2" |
 |
| INVERTED | 45
C 60 C |
Clarkson Autolock | Metric or Imperial | T1 HSS |
13-50 mm 1/2-1 1/2" |
 |
|
TOOLHOLDERS: |
Autolock or Flatted shank Designed for profile,finshing and open slot milling. |
||||
| CHUCK TYPE | STYLE | TYPE | BORES | SPARES | |
| AUTOLOCK CHUCKS & Spares |
Small Medium or Large to suit Clarkson or ISO/DIN Autolock shank cutters |
Morse,
R8 ISO,DIN 2080,B.E System,Deckel DIN69871-A MAS-BT ANSI or Caterpillar |
Metric or Imperial | Adaptors Collets Sleeves Centres Spanners Damping Rings |
 |
| FC3
HOLDERS & Spares |
For
FC3's with 6 mm or 1/4" Clarkson Flatted shanks |
Morse,
R8 ,B.E System, DIN69871-A MAS-BT DIN2080 or ISO |
Metric or Imperial | Adaptors Locking Screws Locking Key |
 |
| DEDLOCK CHUCKS |
ForDedlock 150 or 200 Cutters |
Morse,
R8 ISO,DIN 2080,B.E System,Deckel MAS-BT ANSI or Caterpillar |
Imperial | Screws Locking Shafts Keys Tommy bars |
 |
| SIDELOCK CHUCKS & Spares |
For
Cutters with ISO/DIN flatted shanks 6-50 mm |
DIN
2080 DIN 69871-A ANSI B5.50, Caterpillar MAS-403-BT R8 |
Metric | Keys Screws Rings |
 |
| E.R
Collet CHUCKS & Spares |
For
Cutters with plain shanks 1-26 mm |
DIN
2080 DIN 69871-A ANSI B5.50, Caterpillar MAS-403-BT R8 |
Metric | Collets Locknuts Spanners |
 |
| COMBI
SHEEL MILL MILL ADAPTORS & Spares |
For
DIN 1880 cutters with longitudinal keyway or driving slot to DIN 138 16-40 mm Spigot |
DIN
2080 DIN 69871-A MAS-403-BT Cat/ANSI |
Metric | Call Specials Department |
 |
| CENTRE LOCATORS | To
align machine spindles |
Spherical Cylindrical |
- | - |  |
| PULL STUDS | To
hold chucks in machine spindles |
DIN
69872 ISO 7388-B MAHO-OTT MAS-BT1 |
- | - |  |
|
DEDLOCK & BORE TYPE CUTTERS: |
Autolock or Flatted shank Designed for profile,finshing and open slot milling. |
|||||
| CUTTER | STYLE | SHANK | DIA. | MATERIAL |
SIZE |
|
| FACING
CUTTER (Shell End Mill) |
Standard or Long |
Clarkson Dedlock 150 or 200 |
Imperial | T1 HSS |
1 1/2-6" 1 1/2-3" |
 |
| Rip-R FACING CUTTER (Shell End Mill) |
Standard or Long |
Clarkson Dedlock 150 or 200 |
Imperial | Premium HSS |
1 1/2-4" 1 1/2-3" |
 |